Registration brings RTOs many duties like annual declarations, AVETMISS reporting, and marketing compliance, yet validation often proves to be the most feared.

Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.

Essentially, validation is about identifying which parts of an RTO's assessment process are effective and which need improvement. With a proper grasp of its key aspects, validation becomes less daunting.

Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.

The standards mandate two types of validation.

The first type of assessment validation checks that your RTO's assessment aligns with the training package requirements in your scope.

The following validation type ensures that assessments follow the principles of assessment and rules of evidence.

Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.

A Look at the Two Types of Assessment Validation

Decoding Assessment Validation

As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation or verification, also known as assessment tool validation, relates to the first part of the clause, ensuring all unit requirements are met and workbooks are 100% compliant.

Post-assessment validation, by contrast, focuses on implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

This discussion will center around assessment tool validation.

How to Conduct Assessment Tool Validation

With a grasp of the two validation types, let’s focus on assessment tool validation.

When to Conduct Assessment Tool Validation

Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.

No need to wait for the next validation schedule in your 5-year cycle. Validate new resources immediately to ensure they’re suitable for students.

Still, this isn't the sole reason for conducting this type of validation. Conduct assessment tool validation when you:

- resources are updated
- new training products are added on scope
- course gets reviewed against training product updates
- identify your learning resources as a risk during your risk assessment

The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.

Which Training Products Should You Validate?

Recall, this type of validation aims to ensure all learning resources are compliant before use. All RTOs must validate each unit's resources.

Necessary Resources for Assessment Tool Validation

Learning Materials

To validate your assessment tools, you will need the complete set of your learning resources:

Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.

Learner/student workbook – validate its suitability as an assessment tool. Ensure instructions are clear and answer fields are adequate. This is a frequent gap.

Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item are present. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – such as checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are suitable for the assessment task and address unit requirements.

Assessment Validation Team

Clause 1.11 outlines the requirements for validation panel members, indicating validation can be done by one or more individuals. Typically, RTOs require all trainers and assessors to attend, occasionally inviting industry experts.

As a whole, your validation panel must have:

Current vocational competencies and relevant industry skills for the unit being validated

Current expertise and skills in vocational teaching and learning

One of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or an updated successor

Validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists with the validation process and documentation. It makes it easier to view how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it serves as documented proof that you have validated your resources before student use.

Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are available online. These tools typically have validators review the tools in their entirety to determine if they meet the principles of assessment.

Assessment Principles Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While such templates facilitate validation, they often result in judgment errors because there’s insufficient space for comments on each assessment item.

We highly recommend using a more detailed template to inspect each unit requirement and its corresponding assessment items. Here is an example:

Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Check?

As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.

Principles of Assessment
Fairness – Does the assessment ensure equal opportunity and access for everyone?

Flexibility – Are different options provided in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Does the assessment assess what it is intended to assess? Is it a valid tool for measuring the required skill or knowledge?

Reliability – Will the assessment produce consistent results every time, regardless of who conducts the training? Will different assessors make the same decision on skill competence?

Key Rules of Evidence

Validity – Is the evidence confirming that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool prove that the work is the candidate’s own?

Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?

Although these are regularly covered in VET professional development and nationally recognised training, numerous tools still struggle to meet these requirements.

To prevent using learning resources that do not address some unit requirements, ensure you adhere to these guidelines:

Be Consistent with Your Teachings

Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Complete each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

diapering

prepare bottles, bottle-feed babies, and clean equipment

prepare solid food and feed babies

respond to baby signs and cues appropriately

prepare and settle babies for sleep

monitor and promote age-appropriate physical exploration and gross motor skills

Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Assessment validation checklist Australia Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby won’t suffice.

Complete Compliance or Not Competent

Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be Clearer

Each assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions are not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?

The answer can include:

Necessary materials

Corresponding costs

Time span of activities

Assigned roles and responsibilities

If an assessment item requires multiple answers, specify the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.

The same applies to assessment items with double-barrelled questions or those asking for multiple answers simultaneously. These can confuse both students and assessors, as shown in the sample question below:

Identify a hazard and/or environmental concern in the workplace and select the most effective hazard control hierarchy.

Answers may include, but are not necessarily limited to:

Weather conditions – isolation of the work area, engineering, personal protective equipment

Work area and ground conditions – elimination, isolation, engineering controls

People – isolating, engineering, administration

Structural hazards – substituting, isolation, engineering controls

Chemical hazards – isolating, engineering controls, administration

Equipment or machinery – isolating, use of engineering controls, administration

Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.

Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.